Research Report | PERLITE |
Using Perlite in Containers |
PLANT GUIDE |
The Schundler Company 10 Central Street Nahant, MA 01908 732-287-2244 |
USING PERLITE IN POTTED PLANTS
Before discussing various tests that have been conducted, we have to explain why perlite is such an important soil component in today's container grown and potted plants.
Water is a nutrient. A plant is 90% or more water but it also needs oxygen. Roots supply water and oxygen to plants (perhaps 98% of the oxygen a plant uses comes through its roots. Since both water and air (oxygen) move in, through, and out of soil mixes, both water retention and drainage, and aeration are important considerations in any potting mix.
If the soil is poorly drained, or packed due to fine organic particles, oxygen is cut off from the plant. Also, whenever a plant is watered, it forces air out through the bottom of the pot or it bubbles up to the surface. In a loose, porous soil this is fine because it creates a suction effect which draws in fresh air from the top into the air spaces in the soil.
However, if soil is too moist, or lacks proper drainage, oxygen is excluded and roots gasp for air. Also, a lack of oxygen favors high concentrations of carbon dioxide (a waste product), cutting down on root growth, and certain soil organisms, which like high CO2 concentrations, grow. In the stagnant soil these organisms produce toxic chemicals, which have a disastrous effect on the health of plants. Many gardeners discover this first-hand when they set out container-grown plants and often note that the bottom one-inch is often stagnant and smelly.
This coupled with a low pH (that is, high acidity) and a toxic form of ammonia (NH3) helps to kill plants. The role of perlite particles in a soil mix allows air spaces to form where oxygen and water have free movement.
While most growers seem to prefer coarse grades of perlite, an educational effort is needed to share with them how medium and finer grades of perlite are just as effective in preventing oxygen starvation.
General Observations about Perlite
In general, after years of testing and experimentation, several observations can be made about perlite and its use in potted plants:
1-Plots and pots containing fine, medium, and coarse perlite have had exactly the same weight and size as those using traditional peat mixes. Many tests have proved there should be no hesitation in using finer grades, and that 100% perlite could be used and be just as successful as traditional peat mixes.
2-Tests on the effects of various grades of perlite on the rooting of cuttings and in the germination of seeds found that in all cases, regardless of size, rootings were the same in time, size, and quality. In fact, finer grades required less water to maintain healthy roots. In seed germination, however, coarse grades of perlite did not do as well as finer grades.
3-Perlite also was tested for use in drying out flowers. Flowers were placed in pans of fine perlite and covered lightly. After standing for 3-6 days (or long enough for drying to occur), the flowers were removed and dusted off. Flowers also can be dried using fine perlite and a microwave (approximately 3-5 minutes).
4-100% perlite has been used growing orchids. The fine and medium grades have been tried, but coarse perlite did the best. (For more information on growing orchids in perlite see Growing Orchids in Perlite)
Conclusions
Hopefully the summation of this presentation has been helpful. If you have any questions, or need more information, please look at our other plant guides, or contact us:
The Schundler Company
10 Central Street
Nahant, MA 01908
(ph)732-287-2244 (fax) 732-287-4185
www.schundler.com
Back to Horticultural Main Page